Commercial Floors That Never Close You Down
We install high-build polyaspartic and epoxy systems for warehouses, showrooms, restaurants, and retail, and we schedule the work for nights and weekends so your operation keeps running. Every floor is forklift-rated, chemical-resistant, and matched to the traffic it actually carries.
Commercial floor coatings are high-build epoxy, polyaspartic, or urethane-cement systems that we spec to your facility's traffic, chemical exposure, and slip requirements. We install them on nights, weekends, and in phased sections so your operation never stops, and every floor is forklift-rated, chemical-resistant, and warrantied for 15 years.
Where This System Works Best
Commercial floors cover a lot of ground. These are the situations we get called for most often.
Forklift and pallet-jack traffic, striping requirements, and dock-to-rack wear. A high-build epoxy body with a urethane topcoat carries the load.
Oil, coolant, solvent, and dropped steel. The floor needs chemical resistance and a surface that squeegees clean.
Hot water, grease, and constant moisture, with slip resistance that has to hold up wet. Urethane cement is the standard here.
Customer-facing floors where appearance matters and closing for a week is not an option. Fast-cure systems go in overnight.
Spaces We Coat
We build forklift-rated floors with line striping, safety zones, and dock-to-rack durability. They hold up to pallet jacks, turret trucks, and constant wheel traffic.
High-gloss metallic and solid-color systems make your inventory look better under the lights. The finish stays bright and wipes clean between customers.
Slip-resistant, hot-water-washable urethane cement stands up to a working kitchen. Out front, seamless finishes keep the dining room clean and easy to maintain.
We run fast-cure installs overnight so you open on schedule the next morning. The surface is low-maintenance and holds up to steady foot traffic.
These floors shrug off oil, solvents, and weld spatter, and they clean up with a squeegee. We match the build to the abuse a working shop puts on it.
We install FAA-friendly high-build systems for hangars, plus coolers, labs, and mezzanines. Each one is spec'd for the loads and conditions of the space.
The Right System, Not the Same System
A restaurant kitchen and a forklift aisle do not need the same floor. We walk the space, measure the moisture, and spec the build to match.
This is our one-day system, laid down in full flake or solid color. It stays UV-stable and gets you back in service within 24 hours.
A 100% solids epoxy body carries the load while a wear-rated urethane top takes the abuse. It gives you maximum build for forklift and pallet-jack traffic.
Urethane cement handles steam cleaning, thermal shock, and constant moisture without breaking down. It is the standard we reach for in food service.
We Build Around Your Schedule, Not Ours
We measure your traffic, moisture, and chemical exposure in person, then spec the system to match. You get a build made for your floor, not a one-size quote.
We schedule the install for nights, weekends, or phased sections so operations never stop. Our team coordinates the timing directly with your facility crew.
We diamond-grind with dust control, repair the joints and cracks, then lay down the specified build. Line striping and safety zones go in as part of the same system.
Foot traffic returns the same day on fast-cure systems, and wheels roll again in 24 to 72 hours depending on the spec. We finish with a documented handoff so you know exactly what went down.
Commercial FAQs
Can you install without shutting us down?+
Yes, and most commercial installs run on nights, weekends, or in phased sections. Dust-controlled grinding and low-odor systems let the areas next door stay open while we work.
How do you price commercial work?+
We price by the spec, not just the square footage, so the substrate condition, build thickness, striping, and scheduling all factor in. Site visits and quotes are free, and every quote is honored for 90 days.
Do you handle line striping and safety zones?+
We do, and it is coated into the system rather than painted on top afterward. That covers aisle striping, pedestrian walkways, hazard zones, and 5S layouts.
What about moisture in the slab?+
We test every slab for moisture before we quote it. If the vapor readings run high, we spec a moisture-mitigating primer so the coating does not fail later.
Are you insured for commercial sites?+
We are fully licensed and insured, and we issue certificates of insurance to your facility before the job begins. Our crews are our own, so there are no subcontractors on your site.
Commercial Floor Coatings Near You
Get a Spec and a Firm Number
We'll walk the space, test the moisture, and quote a system that matches your traffic. We honor every quote for 90 days, and the site visit is free.