Polyaspartic Coatings: The One-Day, UV-Stable Upgrade Over Epoxy
Polyaspartic is the system we install on most floors, and for good reason. It cures faster than epoxy, stays clear in sunlight, and flexes through freeze-thaw, which is why we back it with a 15-year warranty.
Polyaspartic is a fast-curing, UV-stable resin coating that outperforms traditional epoxy on most floors. We install it in one day, it resists yellowing in sunlight, and it stays flexible through freeze-thaw instead of cracking, so it is the system we recommend for most garage, basement, and commercial floors we coat across Michiana.
Where This System Works Best
The same system covers a lot of ground. These are the situations we get called for most often.
A homeowner who cannot give up the garage for a week. We grind, coat, flake, and seal in a single visit.
South and west exposure where an epoxy clear coat would amber over time. The aliphatic polyaspartic top stays clear.
An unheated garage that swings above and below freezing all winter. The coating flexes with the concrete instead of fighting it.
A business that cannot close and cannot tolerate heavy odor. Low-odor, fast-cure polyaspartic goes in overnight.
Polyaspartic vs. Epoxy, in Plain Terms
The fast-set chemistry lets us grind, coat, flake, and seal a floor in one day, and you drive on it in 24 hours. Traditional epoxy needs several days to reach the same point.
Aliphatic polyaspartic stays clear in sunlight. Standard epoxy tends to amber and chalk over time, especially in a sun-facing garage.
The coating stays slightly flexible, so it moves with the concrete instead of fighting it. That flexibility rides out the expansion and contraction that cracks rigid epoxy in a cold climate.
The topcoat shrugs off hot tires, abrasion, and chemicals. Those are the exact failure points that take out most DIY kits.
The One-Day Polyaspartic System, Step by Step
We diamond-grind the concrete to open its pores instead of taking acid-etch shortcuts. Then we repair any cracks and spalls with polymer fillers so the coating bonds to sound concrete.
We roll a pigmented polyaspartic base into the fresh profile while the surface is still open from prep. That fresh bond is what keeps the color coat locked to the slab.
We broadcast your chosen blend to full rejection, so you get complete coverage with no thin spots. Then we scrape it smooth for an even finish.
A UV-stable clear polyaspartic locks everything in and gives the floor its wear surface. You walk on it that night and park on it in 24 hours.
Questions We Hear at Every Quote
Is polyaspartic really better than epoxy?+
For most residential and light-commercial floors, it is, because it cures faster, stays UV-stable, and handles the cold better. Epoxy still works well as a high-build body coat in heavy industrial settings, so we install both and match the system to the job.
Why can you install it in one day?+
Polyaspartic cures in hours, so we grind, base-coat, broadcast flake, and clear-coat in a single visit. You come back the next day and drive right onto it.
Does it yellow in the sun like epoxy?+
It does not, because the clear coat is an aliphatic polyaspartic. It stays clear even in a sun-facing garage or an outdoor application.
Is it slippery?+
The flake broadcast already adds texture underfoot. We can add a finer grip additive for wet areas or keep it smoother for a showroom look, and you decide at the quote.
What is the warranty?+
Our polyaspartic systems carry a 15-year adhesion warranty. It is backed locally and put in writing.
Polyaspartic Coatings Near You
A Written Warranty in Plain English
Every install comes with a written 15-year adhesion warranty, and you get the terms in hand with your quote so nothing is a surprise later. Here is exactly what it covers and where it stops.
The warranty stands behind the bond between our coating and your prepped concrete for 15 years.
- Adhesion: the coating stays bonded to concrete we have properly prepped.
- Peeling: no peeling or delamination caused by our preparation or bond.
A coating is tough, but it is not indestructible. A few things sit outside the warranty.
- Chips and scratches: surface marks from dropped tools or heavy impact.
- Physical damage: abuse, gouges, or problems from a slab we did not prepare.
See Full Flake Samples on Your Own Floor
We bring the full flake blends to your driveway and leave a firm number. We honor that quote for 90 days, and flexible financing is available.